WinTV
From Luke Jackson
| Revision as of 23:33, 9 November 2007 (edit) Ljackson (Talk | contribs) ← Previous diff |
Revision as of 23:38, 9 November 2007 (edit) Ljackson (Talk | contribs) Next diff → |
||
| Line 38: | Line 38: | ||
| where 224.1.2.3 is a multicast IP and 1234 the port where send/listen for stream. | where 224.1.2.3 is a multicast IP and 1234 the port where send/listen for stream. | ||
| + | |||
| + | == Sources == | ||
| + | |||
| + | * http://ivtvdriver.org/index.php/Howto:Netcat_streaming | ||
| [[Category:Linux]] | [[Category:Linux]] | ||
| [[Category:Windows XP]] | [[Category:Windows XP]] | ||
Revision as of 23:38, 9 November 2007
Linux
Install Drivers
Simple Multicast Streaming
While not ivtv specific, this little hack is useful for streaming video over the network without the overhead of a system like mythtv. This is especially useful for testing if you have a tv card in a headless box and want to take mythtv out of the equation.
Once you have installed ivtv and got it working, you need to install netcat on both machines.
On the client, run:
nc -l -p 5000 | mplayer -
And on the server, run:
cat /dev/video0 | nc 192.168.4.5 5000
What this does is simply using the netcat program to take whatever comes out of /dev/video0 and send it to 192.168.4.5 on port 5000. The receiving machine listen on port 5000 and take whatever comes in, and sends it to mplayer to show it.
You can use any IP and any port number, as long as it's free and you have the rights to use it. Xine (or any other app for that matter) can also be used instead of mplayer.
Note: Execute the client command first, or the serverside netcat doesnt have anything to connect to.
Multicast stream
I think that emcast is death...
If you want to stream over multicast IP, I suggest to download this little tool: emcast instead netcat.
so, on server, run:
cat /dev/video0 | emcast 224.1.2.3:1234
on client, run:
emcast 224.1.2.3:1234 | mplayer -
where 224.1.2.3 is a multicast IP and 1234 the port where send/listen for stream.