BreadCrumbs: Lirc
Lirc
From Luke Jackson
(Difference between revisions)
| Revision as of 05:33, 3 December 2007 (edit) Ljackson (Talk | contribs) (→Fedora Core 7 (Yum)) ← Previous diff |
Revision as of 05:33, 3 December 2007 (edit) Ljackson (Talk | contribs) (→Fedora Core 7 Install (Yum)) Next diff → |
||
| Line 3: | Line 3: | ||
| LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls. | LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls. | ||
| - | == Fedora Core 7 Install (Yum) == | + | == Install: Fedora Core 7 (Yum) == |
| For Fedora Core 7 I used the atrpms repository. They have already built all the necessary binaries we will need for the installation. You can checkout their install page or follow the condensed instructions. | For Fedora Core 7 I used the atrpms repository. They have already built all the necessary binaries we will need for the installation. You can checkout their install page or follow the condensed instructions. | ||
Revision as of 05:33, 3 December 2007
Contents |
Summary
LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls.
Install: Fedora Core 7 (Yum)
For Fedora Core 7 I used the atrpms repository. They have already built all the necessary binaries we will need for the installation. You can checkout their install page or follow the condensed instructions.
-or-
Install the GPG-Key:
rpm --import http://ATrpms.net/RPM-GPG-KEY.atrpms
Copy the text below into the following file:
/etc/yum.repos.d/atrpms.repo
[atrpms] name=Fedora Core $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/f$releasever-$basearch/atrpms/stable gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms gpgcheck=1 enabled=1
Install the needed packages with yum:
yum install lirc-lib-devel lirc-lib lirc lirc-kmdl-`uname -r` lirc-devices
Hauppauge WinTV-PVR-150, WinTV-PVR-350 Cards
Load the module for Hauppuage 150 and 350 PVR cards with the commands below and then restart lircd:
depmod -a modprobe lirc_i2c /etc/init.d/lircd restart
Enable Lircd on Startup
chkconfig lircd on
Note: See #Could not get file information for /dev/lirc (Lirc Reboot Errors) for a potential bug where Lirc doesn't work after a reboot.
Lircd Files
Lircd files map infrared hex singnals to key names.
Add remotes to the lircd configuration file:
/etc/lircd.conf
Note: Lircd should be restarted after any modifications to this file.
/etc/init.d/lircd restart
Hauppauge WinTV-PVR-150, WinTV-PVR-350 Cards
You can browse the remotes folder that is included in the lirc documentation for your remote control's configuration file.
cp /usr/share/doc/lirc-*/remotes/hauppauge/lircd.conf.hauppauge /etc/lircd.conf
Silver and Black Remote
Silver & Black Remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand: Hauppauge_WinTV-PRV-150
# Created: G.J. Werler (The Netherlands)
# Updated: Ljackson (USA) - 2007/11/19
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-150
#
begin remote
name Hauppauge_WinTV-PRV-150
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
TV 0x000000000000179C
Videos 0x0000000000001798
Music 0x0000000000001799
Pictures 0x000000000000179A
Guide 0x000000000000179B
Radio 0x000000000000178C
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
OK 0x00000000000017A5
Back/Exit 0x000000000000179F
Menu/i 0x000000000000178D
Vol+ 0x0000000000001790
Vol- 0x0000000000001791
Prev.Ch 0x0000000000001792
Mute 0x000000000000178F
Ch+ 0x00000000000017A0
Ch- 0x00000000000017A1
Record 0x00000000000017B7
Stop 0x00000000000017B6
Rewind 0x00000000000017B2
Play 0x00000000000017B5
Forward 0x00000000000017B4
Replay/SkipBackward 0x00000000000017A4
Pause 0x00000000000017B0
SkipForward 0x000000000000179E
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Asterix 0x000000000000178A
0 0x0000000000001780
# 0x000000000000178E
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
end codes
end remote
Lircrc Files
Add commands to the default configuration file:
/etc/lircrc
Additionally you can use place the configuration file in your home directory:
Note: If this file is present it will override the file in /etc/lircrc
~/.lircrc
Note: Lircd should be restarted after any modifications to this file.
/etc/init.d/lircd restart
irexec
#--------------------------------------------------
# File: /etc/lircrc (This works with the '''Hauppage 350 grey remote''')
#--------------------------------------------------
#--------------------------------------------------
# irexec
#--------------------------------------------------
begin
button = Ch+
prog = irexec
config = python /path/to/ivtv-channel.py up
end
begin
button = Ch-
prog = irexec
config = python /path/to/ivtv-channel.py down
end
begin
button = OK
prog = irexec
config = python /path/to/ivtv-channel.py enter
end
begin
button = Prev.Ch
prog = irexec
config = python /path/to/ivtv-channel.py last
end
begin
button = 0
prog = irexec
config = ivtv-tune -c 0
end
begin
button = 1
prog = irexec
config = ivtv-tune -c 1
end
begin
button = 2
prog = irexec
config = ivtv-tune -c 2
end
begin
button = 3
prog = irexec
config = ivtv-tune -c 3
end
begin
button = 4
prog = irexec
config = ivtv-tune -c 4
end
begin
button = 5
prog = irexec
config = ivtv-tune -c 5
end
begin
button = 6
prog = irexec
config = ivtv-tune -c 6
end
begin
button = 7
prog = irexec
config = ivtv-tune -c 7
end
begin
button = 8
prog = irexec
config = /usr/bin/ivtv-tune -c 46
end
begin
button = 9
prog = irexec
config = ivtv-tune -c 9
end
begin
button = Red
prog = irexec
config = killall -9 mplayer
end
begin
button = Green
prog = irexec
config = date
end
begin
button = Yellow
prog = irexec
config = mplayer "/myvideo.avi" &
end
begin
button = Blue
prog = irexec
config = mplayer /dev/video0 &
end
mplayer
#-------------------------------------------------- # File: /etc/lircrc (This works with the '''Hauppage 350 grey remote''') #-------------------------------------------------- #-------------------------------------------------- # mplayer #-------------------------------------------------- begin prog = mplayer button = Menu/i repeat = 3 config = osd end begin button = Vol+ prog = mplayer config = volume +1 repeat = 1 end begin button = Vol- prog = mplayer config = volume -1 repeat = 1 end begin prog = mplayer button = Pause repeat = 3 config = pause end begin prog = mplayer button = Play repeat = 3 config = seek +1 end begin prog = mplayer button = Stop repeat = 3 config = quit end begin prog = mplayer button = Mute repeat = 3 config = mute end begin prog = mplayer button = Forward repeat = 3 config = seek +10 end begin prog = mplayer button = Rewind repeat = 3 config = seek -10 end begin prog = mplayer button = SkipForward repeat = 3 config = seek +30 end begin prog = mplayer button = Replay/SkipBackward repeat = 3 config = seek -30 end begin prog = mplayer button = TV repeat = 3 config = vo_fullscreen end begin prog = mplayer button = Back/Exit repeat = 3 config = quit end
vlc
#-------------------------------------------------- # File: /etc/lircrc (This works with the '''Hauppage 350 grey remote''') #-------------------------------------------------- #-------------------------------------------------- # vlc #-------------------------------------------------- begin prog = vlc button = Play config = key-play-pause repeat = 0 end begin prog = vlc button = Pause config = key-play-pause repeat = 0 end begin prog = vlc button = Stop config = key-stop repeat = 1 end begin prog = vlc button = Back/Exit config = key-quit repeat = 3 end begin prog = vlc button = Ch+ config = key-next repeat = 3 end begin prog = vlc button = Ch- config = key-prev repeat = 3 end begin prog = vlc button = TV config = key-fullscreen repeat = 3 end begin prog = vlc button = Rewind config = key-jump-extrashort repeat = 3 end begin prog = vlc button = Forward config = key-jump+extrashort repeat = 3 end begin prog = vlc button = Replay/SkipBackward config = key-jump-long repeat = 3 end begin prog = vlc button = SkipForward config = key-jump+long repeat = 3 end begin prog = vlc button = Vol- config = key-vol-down repeat = 1 end begin prog = vlc button = Vol+ config = key-vol-up repeat = 1 end begin prog = vlc button = Mute config = key-vol-mute repeat = 0 end begin prog = vlc button = Left config = key-nav-left end begin prog = vlc button = Down config = key-nav-down end begin prog = vlc button = Up config = key-nav-up end begin prog = vlc button = Right config = key-nav-right end begin prog = vlc button = Guide config = key-nav-activate end begin prog = vlc button = Menu/i config = key-disc-menu end begin prog = vlc button = Radio config = key-audio-track end
FAQ
Could not get file information for /dev/lirc (Lirc Reboot Errors)
[root@server.com rc.d]# tail /var/log/messages | grep lirc Nov 19 20:17:50 core lircd-0.8.3-CVS[2268]: accepted new client on /dev/lircd Nov 19 20:17:50 core lircd-0.8.3-CVS[2268]: could not get file information for /dev/lirc Nov 19 20:17:50 core lircd-0.8.3-CVS[2268]: default_init(): No such file or directory Nov 19 20:17:50 core lircd-0.8.3-CVS[2268]: caught signal
Some systems will fail to auto load the lirc module. There are various ways to fix this problem but I found editing the /etc/init.d/lircd startup script to be the easiest.
Edit: First 6 lines in the Start() section.
#!/bin/sh
#
# $Id: lircd.init,v 1.1 2002/09/28 11:54:12 dude Exp $
# Startup script for the Linux Infrared Remote Control.
#
# chkconfig: - 90 10
# description: Enables infrared controls through LIRC.
#
# config: /etc/lircd.conf
# Source 'em up
. /etc/init.d/functions
[ -x /usr/sbin/lircd ] || exit 1
[ -x /usr/sbin/lircmd ] || exit 1
[ -f /etc/lircd.conf ] || [ -f /etc/lircmd.conf ] || exit 1
[ -f /etc/sysconfig/lircd ] && . /etc/sysconfig/lircd
RETVAL=0
start(){
if [ '/sbin/lsmod | grep lirc' != "" ]; then
echo -n $"Reloading lirc_i2c: "
/sbin/modprobe lirc_i2c
RETVAL=$?
echo
fi
if [ -f /etc/lircd.conf ]; then
echo -n $"Starting infrared remote control daemon: "
daemon lircd $LIRCD_OPTIONS
RETVAL=$?
echo
fi
if [ -f /etc/lircmd.conf ]; then
echo -n $"Starting infrared remote control mouse daemon: "
daemon lircmd
RETVAL=$?
echo
fi
if [ -f /etc/irexec.conf ]; then
echo -n $"Starting infrared command execution daemon: "
daemon irexec --daemon /etc/irexec.conf
RETVAL=$?
echo
fi
touch /var/lock/subsys/lircd
return $RETVAL
}
stop(){
if [ -f /etc/irexec.conf ]; then
echo -n $"Stopping infrared command execution daemon: "
killproc irexec
echo
fi
if [ -f /etc/lircmd.conf ]; then
echo -n $"Stopping infrared remote control mouse daemon: "
killproc lircmd
echo
fi
if [ -f /etc/lircd.conf ]; then
echo -n $"Stopping infrared remote control daemon: "
killproc lircd
echo
fi
RETVAL=$?
rm -f /var/lock/subsys/lircd
return $RETVAL
}
restart(){
stop
start
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
restart)
restart
;;
status)
status lircd
;;
condrestart)
[ -e /var/lock/subsys/lircd ] && restart
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart}"
RETVAL=1
esac
exit $RETVAL
lirc_i2c, WinTV-PVR-150, lircd reboot