Asterisk

From Luke Jackson

To learn more about Asterisk and its partners you can visit their website at Asterisk.org.

Contents 1 Introduction 2 Download 3 Hardware 4 Software 5 Tutorials 6 FAQs 6.1 MeetMe: "That is not a valid conference number." 6.2 How do I use "Console commands" (transfer, dial, answer, hangup) from the cli? 6.3 I configured a new IVR and clicked the check box that states "Enable Directory". When I call in and type # I get "I'm sorry, that's not a valid extension." What did I do wrong? 6.4 How do I enable Attended Transfer?

Introduction

Asterisk is an open source PBX system then runs on the Linux operating system.

I support Asterisk because of its price benefits and ease of expansion.

Some key features of Asterisk are listed below.

• Voicemail to eMail
• Softphone (Computer Based Phone) support
• Analog Phone Support (PSTN)
• ISDN PRI support for DID based routing
• VoIP support

Download

• http://asterisk.org/downloads

Hardware

• Digium
• Sangoma

Software

• FreePBX
• ThirdLane

Tutorials

• Asterisk Echo
• Asterisk Install
• Asterisk Firewall
• Asterisk Front End
• Asterisk Logs
• Asterisk Queue
• Asterisk Sipgate
• Server Backup#Asterisk, MySQL, FreePBX

FAQs

MeetMe: "That is not a valid conference number."

Ensure your meetme.conf file uses "," commas and not "|" pipes.

meetme.conf:

conf => 1995,1234

How do I use "Console commands" (transfer, dial, answer, hangup) from the cli?

You'll need chan_oss for that. Chan_oss connects the sound card to the outgoing line. By default it is disabled to include the module chan_oss, you will need to edit a section of the modules.conf file to match the sample below:

; Load either OSS or ALSA, not both
; By default, load OSS only (automatically) and do not load ALSA
;
noload => chan_alsa.so
;noload => chan_oss.so

I configured a new IVR and clicked the check box that states "Enable Directory". When I call in and type # I get "I'm sorry, that's not a valid extension." What did I do wrong?

You must install Information Services, It provides a number of applications accessible by feature codes:

• Company directory
• Call Trace (last call information)
• Echo Test
• Speaking Clock
• Speak Current Extension Number

More info: http://aussievoip.com.au/wiki/freePBX-Features

How do I enable Attended Transfer?

Update your features.conf file to reflect the settings below:

[featuremap]
blindxfer => #                  ; Blind Transfer
disconnect => *9                ; Disconnect Call
automon => *0                   ; One Touch Record
atxfer => *                     ; Attended Xfer