Asterisk
From Luke Jackson
(diff) ←Older revision | Current revision | Newer revision→ (diff)
To learn more about Asterisk and its partners you can visit their website at Asterisk.org.
Introduction
Asterisk is an open source PBX system then runs on the Linux operating system.
I support Asterisk because of its price benefits and ease of expansion.
Some key features of Asterisk are listed below.
- Voicemail to eMail
- Softphone (Computer Based Phone) support
- Analog Phone Support (PSTN)
- ISDN PRI support for DID based routing
- VoIP support
Download
Hardware
- Digium
- Sangoma
Software
- FreePBX
- ThirdLane
Tutorials
- Asterisk Backup
- Asterisk Echo
- Asterisk Install
- Asterisk Firewall
- Asterisk Front End
- Asterisk Logs
- Asterisk Queue
- Asterisk Sipgate
FAQs
How do I use "Console commands" (transfer, dial, answer, hangup) from the cli?
You'll need chan_oss for that. Chan_oss connects the sound card to the outgoing line. By default it is disabled to include the module chan_oss, you will need to edit a section of the modules.conf file to match the sample below:
; Load either OSS or ALSA, not both ; By default, load OSS only (automatically) and do not load ALSA ; noload => chan_alsa.so ;noload => chan_oss.so
I configured a new IVR and clicked the check box that states "Enable Directory". When I call in and type # I get "I'm sorry, that's not a valid extension." What did I do wrong?
You must install Information Services, It provides a number of applications accessible by feature codes:
- Company directory
- Call Trace (last call information)
- Echo Test
- Speaking Clock
- Speak Current Extension Number
More info: http://aussievoip.com.au/wiki/freePBX-Features
How do I enable Attended Transfer?
Update your features.conf file to reflect the settings below:
[featuremap] blindxfer => # ; Blind Transfer disconnect => *9 ; Disconnect Call automon => *0 ; One Touch Record atxfer => * ; Attended Xfer
Categories: VoIP | Linux | Mac OS X